A coal mine dewatering system featuring Vesconite bearings on its vertical turbine pumps has been operating well for six years.
This was the 2020 report from a pump OEM provider about pumps installed in about 2014 at a coal mine in the Midwest of the United States.
The installation required a compact pump system that could handle solid-laden mine water while fitting within a mine void less than 2.4 metres (eight feet) high and a narrow entry space. The solution incorporated short-set vertical turbine pumps fitted with 316 stainless-steel impellers and Vesconite bearings. These components were selected to withstand continuous abrasive wear while allowing the pumps to operate with minimal maintenance over multiple years.
The system lifted approximately 3,800 litres (1,000 gallons) per minute against a vertical head of 171 metres (560 feet), transferring water from underground collection points to surface treatment facilities. After removing solids and adjusting pH, the mine reused the treated water for coal washing, reducing overall water and utility costs.
Vesconite bearings have a long history in harsh mining environments and were developed to cope with the conditions encountered in ultra-deep South African gold mines that extended to depths of 3,500 metres (2.2 miles) below surface at the time. The material performs well in industrial dewatering applications since it survives water with a high suspended-solid load and difficult maintenance access. It is also resistant to acids, mild alkalis, organic chemicals, solvents, hydrocarbons, oils and fuels.




