|
e-Newsletter #2
May 2000
Extended Vesconite Hilube Size
Range
Some months back we mailed you a brochure about Vesconite
Hilube, a bearing material with remarkably low static friction and very
long wear life, even in applications that are unlubricated or unusually
dirty. Examples of where Vesconite Hilube solved critical problems range
from cement plants to pumps.
Many customers made enquiries. Due to the limited range of
sizes available last year, many felt it was not worthwhile to take a size with a
much greater wall thickness than they would use in Vesconite.
We noted these enquiries and decided to make a substantial
investment in production facilities and stock by increasing the Vesconite
Hilube range.
We have introduced 45 new sizes. We believe that
more than 90% of enquiries will be met by the new extended range. It includes
- New rod sizes
- Many new bushing sizes so as to
include all the popular sizes, and
- A new plate size
Attached please find the new stock list for
Vesconite Hilube. If you made an enquiry previously, take this opportunity
to see if there is a suitable size closer to the size you need.
We will also consider producing sizes to meet specific
requirements for customers with a minimum order of more than R5000 for an
individual size.
To learn more about Vesconite Hilube,
please call Ron Leistra and Ian Moffett in Johannesburg (616-1111) or Friedel
Brumloop and Belinda Coetzee in Virginia (057-212-0000).
Or visit our web site www.vesconite.com or e-mail
us at vesconite@vesconite.com. We look forward to hearing from you.
Vesconite Hilube
- Advanced Vesconite with
PTFE
- Longest wear life
- Lowest friction
- For unlubricated
applications
- No stick-slip
- Exceptionally low wear when
lubricated
- Ideal for slow moving,
heavy loads with fine clearances, dirty or unlubricated
VESCONITE HILUBE PRODUCTION
LIST
Vesconite Hilube is a
premium ultra low friction grade of Vesconite, specially compounded to give much
longer service life. It is particularly suited to unlubricated or water
lubricated conditions.
New sizes
BUSHING
(1 metre lengths)
Outside x Inside Diameters (mm) |
| 35 x 20 F |
100 X 35 |
| 38 X 20F |
100 X 40F |
| 40 X 20 |
100 X 60 |
| 40 X 25 |
100 X 75 |
| 45 X 25 |
110 X 70 |
| 45 X 35 |
110 X 90 |
| 50 X 30 |
120 X 60 |
| 50 X 35 |
120 X 75 |
| 55 X 35 |
120 X 90 |
| 55 X 40 |
130 X 70 |
| 60 X 35 |
130 X 85 |
| 60 X 40 |
130 X 100 |
| 60 X 45 |
140 X 100 |
| 60 X 50F |
155 X 75 |
| 65 X 25 |
155 X 100 |
| 65 X 35 |
155 X 125 |
| 65 X 50 |
160 X 140 |
| 70 X 35 |
165 X 125F |
| 70 X 50 |
170 X 125 |
| 75 X 50 |
180 X 100 |
| 75 X 60 |
180 X 140 |
| 80 X 30F |
180 X 160 |
| 80 X 35 |
205 X 150 |
| 80 X 50 |
205 X 170 |
| 80 X 60 |
225 X 170 |
| 90 X 35 |
225 X 190 |
| 90 X 50 |
250 X 190 |
| 90 X 70 |
275 X 215 |
| 90 X 80F |
420 X 375 |
| |
480 X 375 |
New sizes
Rods
(1m lengths)
Diameters (mm) |
| 8 mm |
| 12 mm |
| 16 mm F |
| 18 mm F |
| 20 mm |
| 25 mm |
| 27 mm F |
| 30 mm |
| 35 mm |
| 40 mm |
| 45 mm |
| 50 mm |
| 55 mm |
| 60 mm |
| 65 mm |
| 70 mm |
| 75 mm |
| 80 mm |
| 90 mm F |
| 100 mm |
| 115 mm |
| 125 mm |
| 140 mm F |
| 150 mm |
Machined Plates
(200mm wide, >1m lengths)
Thickness (+0.0/+0.3 mm) |
| 3 mm |
| 5 mm |
| 6 mm |
| 8 mm |
| 10 mm |
| 12 mm |
| 15 mm |
| 16 mm |
| 20 mm |
| 25 mm |
| 30 mm |
| 40 mm |
| 50 mm |
Rods and bushing will machine to the stated nominal
diameter.
Standard lengths are 1000mm. Non-standard lengths (up to 3m) or short lengths
are subject to a surcharge.
Sizes marked F are discontinued sizes and are available until existing stocks
are sold out.
Special sizes can be produced subject to tooling charges
and production order.
If out of stock, allow 2 to 4 weeks for production.
Semi- and finished custom components manufactured in small to large quantities
include bushes, washers, discs, plates, slides and strips.
VescoPlastics: Vesconite Manufacturer, low
maintenance bushes and bearings
www.vesconite.com
e-mail: vesconite@vesconite.com
Tel: 616-1111 Fax: 616-2222 International (+27-11)
PO Box 40647, Cleveland, 2022 South Africa
| 