Machining Tolerances for Vesconite bushes
Machining
Tolerances
Vesconite
can be machined on standard machining equipment. Bushes that are long
(length greater than diameter) or have thin walls require additional
care.
Suggested
Vesconite machining tolerances are:
|
|
Standard |
Minimum |
|
|
|
|
Metric |
Imperial |
|
Outside diameter |
± 0.1% of outside diameter |
± 0.025 mm |
± 0.001" |
|
Inside diameter |
± 0.1% of inside diameter |
± 0.025 mm |
± 0.001" |
|
Wall thickness |
+ 0.0 / -0.5% of wall thickness |
+ 0.0 / -0.025 mm |
+ 0.0 / -0.001" |
|
Length |
+ 0.0 / -0.5% of length |
+ 0.0 / -0.3 mm |
+ 0.0 / -0.01" |
Updated Jun 01 2005
